Part Number Hot Search : 
D22012P LD29300 AD1380KD 2SC47 BSS44 MLC241B AD1380KD NDB610AE
Product Description
Full Text Search
 

To Download ET104 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Catalog HY14-3201/US
Technical Information General Description
w
The ET104 series electronic module is used to control TDA and TEA proportional throttle valves configured with the `L' solenoid option. For valves configured with the `M' solenoid option, refer to driver card ET154. The module accepts a 0 to 10 volt command signal, and produces a proportionally linear output current used to drive the valve's proportional solenoid. Note that the linearity of the valve itself determines the linearity of the system. Refer to the specific valve data for actual linearity performance. Two ramp adjustments provide control of actuator acceleration and deceleration.
w
a D . w
aS t
ee h
4U t
om .c
Drivers Series ET104
A
)(
B Y
Features
* * * *
Processing and amplification of the externally supplied positive set-values into output signals for the control solenoid. Can be combined with EZ150 or external programmable control. DIP switch from internal ramp generation to external ramp setting. MIN/MAX limiters for matching the working range to the full set value range. Pulsed low-loss amplifier power stage with supporting constant current control for constant, temperatureindependent, solenoid forces.
Specifications
F
* * *
Dither generator with applied frequency to improve static characteristics. Diagnosis by means of diagnostic sockets as well as LEDs for indicating working conditions.
Dimensions
160.0 (6.30)
A
w
w
.D w
t a
S a
100.0 (3.94) B
e h
Connection
t e
U 4
.c
m o
31 Pole Male Connector, DIN 41617 Regulated: 18-26V Unregulated: 22-38V 40 VA 0 to +10 VDC
Power Supply Power Required Command Signal
Input Select Voltage 5 to 30 VDC Reference Outputs Max. Solenoid Output Current Ambient Temp. Range Ramps Shielded Cable Connection +10 VDC 10 mA 1.05A with set value 10V 0C to +70C (+32F to +158F), Standard Range 0 to 5 seconds adjustable Supply connections + valve: 1.5 sq. mm (16 AWG) Command Signals: 0.5 sq. mm (20 AWG)
DIP=Ext./Int. ramp presets
Fuse
2A medium lag, DIN 41571/5x20 mm
ET104.p65, dd, an
Hydraulics
w
F8
w
w
.D
a
aS t
ee h
4U t
om .c
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA
Catalog HY14-3201/US
Technical Information Connector (Elevation B)
Drivers Series ET104
2
1
11 Reference potential 0V supply 14 Input command voltage 0...+10VDC 13 Input ramp disable 16 Output +10V reference 18 Input 24VDC supply 22 Input external ramp option
25 Output to control solenoid 27 Input external ramp option
26 Output to control solenoid 31 Reference potential 0V set value
F
Operating and Diagnostic Elements (Elevation A)
Notes:
1 2 3
* *
Turn off the electrical power to this board whenever the hydraulic supply to the valve is not on. Always turn off the power to this board before removing it from the card holder.
1 MIN limiter for matching the smallest throttle aperture 2 MAX limiter for matching the largest throttle aperture 3 not used 4 Red socket for current diagnostic 5 Black socket for current diagnostic 6 Red LED (A) for: - function indicator control solenoid - (B not used) 7 Yellow LED for: - correct voltage supply 8 Green grip strip with reference information for measured values 9 UP ramp potentiometer 10 DOWN ramp potentiometer
Only potentialfree measuring equipment to be used
4 6
5 8 7 9 10
ET104.p65, dd, an
Hydraulics
F9
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA
Catalog HY14-3201/US
Technical Information Block Diagram
Drivers Series ET104
F
Ordering Information
ET
Electronic Module Pressure Valve Valve Size
104
Module Type
10
** Design Series ** Replaces /D Series Units
Code 00 00 99 99
Valve TDA...LAF E16 to E50 TEA...LAF E16 to E50 TDA...LAF E63 to E100 TEA...LAF E63 to E100
Sol. 35mm 35mm 60mm 60mm
Code 104
Description Amplifier, adjustable MIN/MAX limits, UP/DOWN ramps for valves with `L' solenoid option
ET104.p65, dd, an
Hydraulics
F10
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA


▲Up To Search▲   

 
Price & Availability of ET104

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X